Valuta
Benvenuto/a, Entra
cavo USB di configurazi- one JTAG a basso ...
Complemento del XUP USB-JTAG Programming ...
Tutti i produttori altri - miscellaneous Arrow Electronics, Inc. Avnet Electronics Marketing Digilent, Inc. Eikon s.r.l. GlobalTop Technology Inc. Hirose Connectors Infineon Technologies AG Inrevium OHO-Elektronic Samtec, Inc. Sarantel Limited SystemBase Co,. Ltd. Telit Wireless Solutions Teltonika UAB Trenz Electronic GmbH TrioFlex OY Xess Xilinx, Inc.
Tutte le Offerte
-- Prezzo: dal più basso Prezzo: dal più alto Nome: dalla A alla Z Nome: dalla Z alla A Da quelli in magazzino Ordina per
interfaccia utente grafica per FPGA Xilinx.
Perfect for Digilent C-MOD or anything in the 2 x 20-pin DIP package.
Standoffs
Digilent 2-pin MTE cable connector (power)
Digilent 6-pin header connector and gender changer
micro-SIM connector - economy
connettore per scheda SIM, eiettore incernierato, 6 poli, interruttore per rilevazione scheda.
Digilent 2x6-pin header connector and gender changer
6 Pin Cable Connector (6 inches)
dual band (900 / 1800 MHz) multilayer ceramic antenna
micro-SIM connector - premium
board-to-board plug for Telit GM862 series
connettore per scheda SIM, inserzione / espulsione a pressione, 6 poli, interruttore per rilevazione scheda.
cross-section: AWG28; pitch: 1,27 mm
Wire Kit
Complemento del XUP USB-JTAG Programming Cable (XUP-USB-JTAG).
1 Pin MTE cable connector
2 connettori multipolo, due file, 100 contatti per moduli OHO-Elektronik GODIL (versione nuda).
spina a montaggio superficiale (SMD) per moduli OHO-Elektronik GODIL (versione nuda).
Digilent 6-pin MTE cable connector
Digilent 2-pin MTE cable connector (9 inches)
HDMI Cable (Type A to Type A)
adattatore per schede microSD a 6 piedini con passo di 2,54 mm = 100 mil, compatibile con Digilent Pmod
2 x connettore presa filo-scheda multipolo, due file, 100 contatti per moduli OHO-Elektronik GODIL (versione nuda).
prototyping board
mating connector for VHDC receptacle/female connectors assembled on Digilent boards
The Digilent PmodSWITCH Switch Module Board has four slide switches that can be used to provide on and off inputs into a circuit or board.
Keyboard/mouse connector
The PmodLED has four high-bright LEDs that are driven by logic-level transistors so each LED can be illuminated with a logic high signal that provides less than 1mA of current.
The Digilent PmodCON4 peripheral module connects a 6-pin header to two RCA audio jacks allowing you to connect to audio equipment.
Hirose FX2 Series, 1.27mm Pitch Multi-function Two Piece Connector
GPS external active antenna, SMA connector, 2.0 meter cable
display a led, 7 segmenti, 3 cifre (rosso-rosso-rosso), concatenabile, controllo VHDL, 3.3 V DC, 6 piedini (compatibile Digilent Pmod).
Hirose FX2 Series, 1.27mm Pitch Multi-function Two Piece Connector (IDC = connettore a perforazione d'isolante)
display a led, 7 segmenti, 3 cifre (verde-verde-verde), auto-concatenabile, controllo VHDL, 5.0 V DC, 9 piedini.
USB to Serial Adapter Cable
connettore per kit con interfaccia VITA 57 = FMC (p.e. Xilinx Spartan-6 FPGA SP601/SP605 Evaluation Kit)
8 high bright LEDs
The PmodSSD offers a single two-digit seven-segment display device (7sd) that can attach directly to any Digilent system board.
The PmodMIC is ideal for providing audio input for use with Digilent system boards. It has a microphone preamp with a dynamic range compressor and 12bit A/D converter.
The Digilent PmodTPH2 Test Point Header Module Board (the TPH2) is an ideal way to test the connection between a Pmod and system board with 12-pin (2x6) connectors loaded.
The Digilent PmodCON2 Module Board makes it easy to connect a Digilent system board to outside devices with BNC plugs.
The Digilent PmodCON1Module Board is designed for use with a Digilent system board and conveys I/O signals between six screw terminals and a 6-pin header connection.
USB to UART Interface.
1:19 gear ratio.
Low-power GPS riceiver based on MediaTek MT3329 chip, Antenna Advisor, anti jamming, pin and function compatible with most LEA GPS receivers
ricevitore GPS a basso consumo basato su MediaTek MT3329 con UART (TTL), USB, PPS, antenna planare attiva, antenna esterna opzionale, commutatore automatico con protezione da corto-circuito. RTCM e SPI opzionali.
ricevitore GPS con chipset MediaTek MT3329 (amplificatore, interfaccia seriale, interfaccia USB)
GPS riceiver with MediaTek MT3339 chipset (amplifier, 2 UART serial interfaces, Easy technology)
oggetti: 10 20 50 50
Nessun prodotto
Spedizione 0,00 € Totale 0,00 €
Prezzo (IVA compresa)
Carrello Acquista
telegramma - chat with us
chiamaci - call us
Tutti i nuovi prodotti
Tutti gli articoli più venduti