MYIR: MYD-C7Z020 industrial (MYD-C7Z020-4E1D-667-I)
Xilinx Zynq development board, Zynq-7020, 1GB DDR3, 4GB eMMC, 32MB QSPI Flash

MYIR: MYD-C7Z020 industrial (MYD-C7Z020-4E1D-667-I)
€ 291,89 (€ 356,11) *

Prezzo IVA esclusa (inclusa) più spese di spedizione.

Supplier lead time: 4 giorni lavorativi

  • 101501
  • MFMP-101501 (+ MFMP-SPESE_FISSE, opz. "codici del catalogo")
  • MYIR
  • MYD-C7Z020-4E1D-667-I
  • 0
  • 4 giorni lavorativi
MYIR is a Xilinx Alliance Member,... altro
Informazione prodotto "MYIR: MYD-C7Z020 industrial (MYD-C7Z020-4E1D-667-I)"

MYIR is a Xilinx Alliance Member,
welcome to use MYIR's Xilinx products!
MYIR also offers custom design services. Please contact us for inquiries.


The MYD-C7Z010/20 development board is built around the MYC-C7Z010/20 CPU Module which is a compact Linux-ready ZYNQ-based SOM (System on Module). The MYC-C7Z010/20 combines the Xilinx XC7Z010 (ZYNQ-7010) or XC7Z020 (ZYNQ-7020) SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base board through two 0.8mm pitch 140-pin board-to-board connectors.

The MYD-C7Z010/20 development board takes full features of the Zynq-7010 / 7020 SoC which is among the Xilinx Zynq-7000

family, featuring powerful dual-core ARM Cortex-A9 processing system and Xilinx 7-series Field Programmable Gate Array (FPGA) logic unit to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial

port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to

allow you to take advantage of Xilinx XADC; it has three PMoD headers to meet your I/O needs with PMoDs (only for 7020); it also

has a low-pin count FMC connector to allow various FMC cards for custom I/O options. User can integrate a MYC-C7Z010 or a

MYC-C7Z020 SOM on the same base board, thus making two variants of Zynq evaluation boards.

MYD-C7Z010 Development Board – with MYC-C7Z010 CPU Module for Xilinx Zynq-7010

MYD-C7Z020 Development Board with MYC-C7Z020 CPU Module for Xilinx Zynq-7020

MYD-C7Z010/20 Development Board

The MYD-C7Z010/20 development board is delivered with necessary cable accessories and MYIR offers optional 4.3-inch and 7-inch

LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for evaluation and

prototype based on Xilinx Zynq-7000 All Programmable SoC family.


Mechanical Parameters

  • Dimensions: 190mm x 110mm (base board), 75mm x 55mm (CPU Module)
  • PCB layers: 4-layer design (base board), 10-layer design (CPU Module)
  • Power supply: 12V/0.5A (base board), 5V/0.5A (CPU Module)
  • Working temp.: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

OS Support

  • Linux 3.15.0

The MYD-C7Z010/20 Controller Board (MYC-C7Z010/20 CPU Module)

MYC-C7Z010/20 Top-view                                                               MYC-C7Z010/20 Bottom-view


  • Xilinx XC7Z010-1CLG400C (Zynq-7010) or XC7Z020-1CLG400C/I (Zynq-7020)
  • - 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
    - Integrated Artix-7 class FPGA subsystem
    with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
    with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
    - NEON™ & Single / Double Precision Floating Point for each processor
    - Supports a Variety of Static and Dynamic Memory Interfaces


  • 1GB DDR3
  • 4GB eMMC
  • 32MB QSPI Flash (16MB is optional)

Peripherals and Signals Routed to Pins

  • 10/100/1000M Ethernet PHY
  • External watchdog
  • Three LEDs
  • - One blue LED for power indicator
    - One red LED for FPGA program done indicator
    - One green user LED
  • Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
    - One Gigabit Ethernet
    - One USB OTG 2.0
    - Two Serial ports
    - Two I2C
    - Two CAN BUS
    * Serial ports, I2C and CAN signals will be reused in PS part, or implemented through PL pins
    - Two SPI (can be implemented through PL pins)
    - ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
    - One SDIO

The MYD-C7Z010/20 Base Board (MYB-C7Z010/20)

MYD-C7Z010/20 Base Board (MYB-C7Z010/20)

PS Unit

  • Four USB 2.0 Host ports (through USB Hub)
  • One RS232 (DB9 port)
  • One TF card slot (bootable)
  • One CAN interface
  • One 10/100/1000M Ethernet
  • One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
  • Battery backed RTC
  • One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
  • Jumpers
  • - One for booting selection from TF card or QSPI
    - One for JTAG selection for using PS and PL reused or independent JTAG configured through PL pins
    - One for selection if adding FMC module to JTAG

PL Unit

  • One XADC interface
  • One Xilinx standard LPFMC interface
  • One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
  • LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen)
  • Two LEDs (one for FMC module detection, one for power indicator)
  • Three-channel PMoD (only for XC7Z020)

Other MYIR's Xilinx Products

Hardware Features

The Xilinx Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.

The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix®-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex®-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.








Processor Core

Dual ARM® Cortex™-A9 MPCore™ with CoreSight™

Processor Extensions

NEON™ & Single / Double Precision Floating Point for each processor

L1 Cache

32 KB Instruction, 32 KB Data per processor

L2 Cache

512 KB

On-Chip Memory

256 KB

Memory Interfaces



2x USB 2.0 (OTG), 2x Tri-mode Gigabit Ethernet, 2x SD/SDIO

Logic Cells

28K Logic Cells

74K Logic Cells

85K Logic Cells

125K Logic Cells

275K Logic Cells

350K Logic Cells

444K Logic Cells

BlockRAM (Mb)

240 KB

380 KB

560 KB

1,060 KB

2,000 KB

2,180 KB

3,020 KB

DSP Slices








Transceiver Count

4 (6.25 Gb/s)

up to 4 (12.5 Gb/s)

up to 16 (12.5 Gb/s)

up to 16 (12.5 Gb/s)

up to 16  (10.3125 Gb/s)

Zynq-7000 Devices

MYD-C7Z010/20 Function Block Diagram

Dimensions of MYD-C7Z010/20

Software Features

The MYD-C7Z010/20 development board is preloaded with Linux 3.15.0. MYIR provides software package in product disk along with the goods delivery. The software package features as below:





Cross compiler

gcc 4.6.1

gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50)

Boot program


First boot program including FSBL, bitstream

Source code provided


Secondary boot program

Source code provided

Linux Kernel

Linux 3.15.0

Customized kernel for MYD-C7Z010/20

Source code provided


USB Host

USB Host driver

Source code provided


Gigabit Ethernet driver

Source code provided


MMC/SD/TF card driver

Source code provided


CAN driver

Source code provided

LCD Controller

XYLON LCD driver

Source code provided


HDMI (SII902X chip) driver

Source code provided


Button driver

Source code provided


UART driver

Source code provided


LED driver

Source code provided


GPIO driver

Source code provided


QSPI Flash S25FL256S driver

Source code provided


DS3231 RTC driver

Source code provided

Resistive Touch

TSC2007 resistive touch screen driver

Source code provided

Capacitive Touch

FT5X0X capacitive touch screen driver

Source code provided


ADC driver

Source code provided

File System


Ramdisk system image


Tar file

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

1 Xilinx Zynq-7000 Overview 658 KB
2 MYD-C7Z010/20 Development Board Overview
1.12 MB

3 MYC-C7Z010/20 CPU Module Overview 1.86 MB
4 MYC-C7Z010/20 Expansion Connectors Pin-out description 1.14 MB
5 MYD-C7Z010/20 Base Board Schematic 817 KB
6 Track length of MYC-C7Z010/20 CPU Module 18 KB
7 Track length of MYD-C7Z010/20 Base Board 18 KB

MYD-C7Z010/20 Development Board

MYC-C7Z010/20 CPU Module Top-view

MYC-C7Z010/20 CPU Module Bottom-view

MYD-C7Z010/20 Development Board Base Board (MYB-C7Z010/20)

Price and Ordering


Part No.

Packing List

Unit Price
(FOB Shenzhen)



Development Board

(commercial grade)

- One MYD-C7Z010 board
- One 1.5m cross Ethernet cable
- One DB9 UART cable
- One HDMI cable
- One 12V/1.25A Power adapter
- One product disk 
(including user manual, 
base board schematic in PDF format, 
datasheets and software package)


Search the article part number and add to the shopping cart
(industrial grade)
Search the article part number and add to the shopping cart

Development Board


(commercial grade)

- One MYD-C7Z020 board
- One 1.5m cross Ethernet cable
- One DB9 UART cable
- One HDMI cable
- One 12V/1.25A Power adapter
- One product disk
(including user manual,
base board schematic in PDF format,
datasheets and software package)

USD329 Search the article part number and add to the shopping cart

(industrial grade)

Search the article part number and add to the shopping cart

CPU Module


(commercial grade)

- One MYC-C7Z010 CPU Module
XC7Z010-1CLG400C SoC)

- One product disk
USD139 Search the article part number and add to the shopping cart

(industrial grade)

- One MYC-C7Z010 CPU Module
XC7Z010-1CLG400I SoC)

- One product disk
Search the article part number and add to the shopping cart


CPU Module


(commercial grade)

- One MYC-C7Z020 CPU Module

(with XC7Z020-1CLG400C SoC)

- One product disk
USD159 Search the article part number and add to the shopping cart

(industrial grade)

- One MYC-C7Z020 CPU Module

(with XC7Z020-1CLG400I SoC)

- One product disk
Search the article part number and add to the shopping cart
LCD Module


4.3-inch LCD Module
with resistive touch screen

USD60 Search the article part number and add to the shopping cart

LCD Module

7-inch LCD Module

with resistive touch screen

USD99 Search the article part number and add to the shopping cart
LCD Module
MY-TFT070CV2 7-inch LCD Module

with capacitive touch screen

USD99 Search the article part number and add to the shopping cart


1. One MYD-C7Z010/20 Development Board includes one CPU module MYC-C7Z010/20 mounted on the base board by default. If you need more CPU module, you can order extra ones.

2. Discount is available for mass orders. Please contact MYIR for inquires.

3. The boards of commercial grade can work in temperature ranging from 0~70 Celsius. The boards of industrial grade can work in temperature ranging from -40~85 Celsius.

4. We accept custom design based on the MYD-C7Z010/20, whether reducing, adding or modifying the existing hardware according to customer’s requirement.

Link correlati a "MYIR: MYD-C7Z020 industrial (MYD-C7Z020-4E1D-667-I)"
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "MYIR: MYD-C7Z020 industrial (MYD-C7Z020-4E1D-667-I)"
Scrivi una valutazione
Le valutazioni vengono attivate dopo la verifica.
Inserisci questi caratteri nel campo di testo sottostante.

I campi contrassegnati con * sono obbligatori.