Trenz Electronic: TEBA0841 (TEBA0841-02)
TEBA0841 - Simple base for TE0841 and TE0741

Quantità Prezzo unitario
Fino a 9 € 79,00 (€ 94,01) *
Da 10 € 71,10 (€ 84,61) *
Da 25 € 67,15 (€ 79,91) *
Da 50 € 63,20 (€ 75,21) *
Da 100 € 59,25 (€ 70,51) *
Da 250 € 55,30 (€ 65,81) *
Da 500 € 51,35 (€ 61,11) *
Da 1000 € 47,40 (€ 56,41) *
Da 5000 € 47,40 (€ 56,41) *

Prezzo IVA esclusa (inclusa) più spese di spedizione.

Pronto per la spedizione in 2 o 3 giorni lavorativi

  • 101762
  • MFMP-101762 (+ MFMP-SPESE_FISSE, opz. "codici del catalogo")
  • Trenz Electronic
  • TEBA0841-02
  • 14
  • Please contact us.
The Trenz Electronic TEBA0841 is a low cost carrier board for testing, evaluation and... altro
Informazione prodotto "Trenz Electronic: TEBA0841 (TEBA0841-02)"

The Trenz Electronic TEBA0841 is a low cost carrier board for testing, evaluation and development purposes of the TE0841 and TE0741 modules. Although this base-board is dedicated to the modules TE0841 and TE0741, it is also compatible with other Trenz Electronic 4 x 5 cm SoMs. The carrier board offers one SFP connector, one Micro USB2 B connector, two 2x25-pin headers and one XMOD header to get access to the I/O's and interfaces of FPGA modules. To test and evaluate the Multi-gigabit transceiver units of the FPGA module, 6 MGT lanes on the carrier board are routed in a loop-back circuit on the B2B connectors.

Supported functional range: Wiki Trenz Electronic 4 x 5 cm carrier boards

Features

  • Trenz 4 x 5 module socket (3x Samtec LSHM series connectors)
  • 1 x XMOD (TE0790) pin header
  • 1 x TE0790 XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
    This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately.
  • 1 x 16-pin header (JTAG, MGT-CLK, Boot Mode, RST, I/O's)
  • 1 x 10-pin header (SD I/O's)
  • 2 x 50-pin header (FPGA Bank I/O's and Power)
  • 1 x SFP connector
  • 1 x MicroUSB
  • 1 x pin header for FPGA Bank Power VCCIOA (M1.8VOUT, 2.5V, 3.3VOUT)
  • 1 x pin header for FPGA Bank Power VCCIOB (M1.8VOUT, 2.5V, 3.3VOUT)
  • 1 x pin header for FPGA Bank Power VCCIOC (M1.8VOUT, 2.5V, 3.3VOUT)
  • 1 x pin header for FPGA Bank Power VCCIOD (M1.8VOUT, 2.5V, 3.3VOUT)
  • 1 x pin header for VBAT (battery connection)
  • 1 x LDO Voltage regulator 3.3V to 2.5V
  • 1 x dip-switch (bootmode, EN1, MODE, NOSEQ)
  • 2 x user LEDs (red/green)

Scope of Delivery

  • 1 x TEBA0841-02 carrier board
  • 1 x TE0790 XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
    This adapter is not suitable for the supply of basic board + module; a power supply has to be attached seperately.
  • 2 x Pin Header, straight, double row, 50 pins
  • 4 x Jumper

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Link correlati a "Trenz Electronic: TEBA0841 (TEBA0841-02)"
Leggere, scrivere e discutere recensioni... altro
Valutazione cliente per "Trenz Electronic: TEBA0841 (TEBA0841-02)"
Scrivi una valutazione
Le valutazioni vengono attivate dopo la verifica.
Inserisci questi caratteri nel campo di testo sottostante.

I campi contrassegnati con * sono obbligatori.

Visto