Trenz Electronic GmbH
Carrier board for TE0729 Zynq-7020 SoC with USB-A-Host Connector (TEB0729-03A)
Das Trenz Electronic Trägerboard TEB0729 wurde speziell für die Nutzung des Trenz Electronic Moduls TE0729 konzipiert und entwickelt.
Artikelnummer VAR-827000724
Nicht auf Lager, Nachbestellung läuft
Ausführungsfristen 3 Tage. Bestellung möglich, Lieferzeit auf Anfrage.
112,13 EUR
*
Inhalt
1 Stück
Loggen Sie sich ein und erhalten Sie bessere Preise. Oder kontaktieren Sie uns und fragen Sie nach dem B2B-Status .
* Exkl. MwSt. exkl. Versandkosten
This article is the replacement for the TEB0729-02.
The Trenz Electronic TEB0729 carrier board was especially designed and developed for the use of Trenz Electronic module TE0729. It provides low-cost connection and extension to Trenz Electronic micromodules from the TE0729 series.
Features
- Barrel jack for 5 V power supply
- 2 x RJ45 10/100-BaseT Ethernet MagJack with 2 integrated LEDs
- 1 x RJ45 Gigabit Ethernet MagJack with 2 integrated LEDs.
- 2 x Configuration EEPROM's, connected to SoM's I²C interface
- XMOD compatible header to connect the TE0790 USB 2.0 adapter board
- JTAG and UART interface over XMOD header
- MicroSD Card socket, can be used to boot system
- USB 2.0 socket
- 4-bit DIP switch for SoM configuration (SoM's JTAG access and Bootmode)
- VG96 connector soldering-pads J8 for access to SoM's PL-IO-bank-pins, usable as LVDS-pairs
- VG96 connector soldering-pads J9 for access to further interfaces and IO's of the SoM
- 1 x user LED (red)
- 1 x user push-button routed to SoM (Reset function at standard configuration)
- Pin headers to set PL-IO-bank's VCCIO with jumper
Scope of Delivery
- 1 x TEB0729-03A Trenz Electronic carrier board for TE0729 SoMs
- 2 x VG96 Socket Connector Vertical
Required Hardware
- Switching Power Supply 5 V DC
- XMOD FTDI JTAG Adapter (Trenz Electronic artice number TE0790)
Additional Information
- Manufacturer's article number: TEB0729-03A
- Trenz Electronic TEB0729 Wiki
- Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.
Art.-ID | 100612 |
Zustand | Neu |
Legacy item ID | 2795 |
Modell | TEB0729-03A |
Hersteller | Trenz Electronic GmbH |
Herstellungsland | Deutschland |
Inhalt | 1 Stück |
Gewicht | 107 g |
Netto-Gewicht | 107 g |