Digilent Inc.
Digilent MCC USB-234: 16-bit, 100 kS/s Multifunction DAQ Device
The Measurement Computing USB-234 is a USB-based, 16-bit, multifunction DAQ device.
| Ceres::Template.singleItemTechnicalDataAttribute | Ceres::Template.singleItemTechnicalDataValue |
|---|---|
| ID articolo | 103455 |
| Condizione | |
| Modello | 6069-410-013 |
| Produttore | Digilent Inc. |
| Paese di produzione | |
| Numero della tariffa doganale |
Numero di variazione (MEPA): VAR-827003877
Codice produttore: 6069-410-013
Codice doganale:
Il prodotto importato viene spedito da Riedlingen, Germania.
The Measurement Computing USB-234 is an USB-based, 16-bit multifunction measurement device. It features 8 analog SE/4 DIFF inputs with a fixed analog input range of 10 V, 16-bit resolution, two 16-bit analog outputs, eight digital I/O, and a 32-bit counter. The USB-234 offers a sampling rate of 100 kS/s. This device is powered via USB and do not require an external power supply.
This device has two 16-bit analog outputs. One or both outputs can be updated at a rate of up to 5 kS/s per channel. The output range is fixed at 10 V.
The USB-230 series devices have eight TTL-level digital I/O lines. Each channel can be selected by software as input or output. Digital input voltage ranges from 0 V to 5 V are supported, with thresholds of 0.8 V (low) and 2.3 V (high). In output mode, each digital channel can operate at 3.3 V, with current in the source/sink limited to 4 mA. All DIO lines are set to high impedance inputs at system startup and reset. The device does not drive the signal high or low. A weak pull-down resistor is connected to each line. All digital I/O updates and sampling are done at software speed. The USB-230 series devices have an external digital trigger input that can be set to rising or falling edge detection via software. The USB-230 Series devices support a 32-bit rising edge counter that accepts inputs up to 5 MHz.
Key Features
- 8 SE/4 DIFF analog inputs
- 16-bit resolution
- USB-231: 50 kS/s sample rate
- 10 V input range
- Two 16-bit analog outputs
- Eight digital I/O
- One counter input
- No external power required
Project Links
Scope of Delivery
- MCC USB-234
- USB cable (micro-USB type B)
- Two screw terminal connector plugs
- Printed insert: DAQami Quick Start
- MCC packaging assembly/foam, etc.
References
- Manufacturer: DigilentInc.
- Manufacturer'sarticle name: MCC USB-234: 16-bit, 100 kS/s Multifunction DAQ Device
- Manufacturer's article number: 6069-410-013
Resources
| Ceres::Template.singleItemTechnicalDataAttribute | Ceres::Template.singleItemTechnicalDataValue |
|---|---|
| ID articolo | 103455 |
| Condizione | |
| ID della variazione | 0196900fc11373779b06b7b8e3ef4458 |
| Modello | 6069-410-013 |
| Produttore | Digilent Inc. |
| Paese di produzione | |
| Contenuto | 1 undefined |
| Peso | 352 g |
