Trenz Electronic GmbH
Carrier Board with unsoldered headers for TE0300/TE0630 (TE0303-01NC)
Provides low-cost connection and extension to the Trenz Electronic TE0300 and TE0630 industrial micromodules.
Référence de l’article VAR-827000573
The Trenz Electronic TE0303 prototyping carrier board provides low-cost connection and extension to the Trenz Electronic TE0300 and TE0630 industrial micromodules.
The democarrier board has a total of 42 differential signal pairs routed with a differential impedance of 100 ohm to header connectors J1 to J4. These lines can be used for high speed signaling up to 666 Mbit/s per differential pair (see Xilinx Application Note XAPP485).
The demo carrier board has a total of 26 single ended lines routed to header connectors J1 to J4. These lines can be used for low-speed and medium-speed signals.
Specifications
- 42 differential pairs (for high-speed signals) available on header connectors with 2.54 mm (100 mil) pitch
- 26 single-ended lines (for low- / medium-speed signals) available on header connectors with 2.54 mm (100 mil) pitch
- Board supply via DC jack, screw terminals or USB connector
- Small form factor: 115 mm x 70 mm
- 2.1 mm jack
Scope of Delivery
- 1 x TE0303-01NC Trenz Electronic Prototyping Carrier Board
- Headers are not soldered on the board, but are included
Available for download
- User Manual
- Schematics
- Assembly Diagram
Additional Information
- Manufacturer's article number: TE0303-01NC
- Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.
| ID de l’art. | 100461 |
| État | |
| ID de l'ancien article | 2267 |
| Modèle | TE0303-01NC |
| Fabricant | Trenz Electronic GmbH |
| Pays de fabrication | Allemagne |
| Contenu | 1 pièce |
| Poids | 85 g |
| Poids net | 85 g |
