Description

CS-428i converts RS232 signals to RS422 or 485 with enhanced 3KV optical isolation protection for industrial environments. It is a fast and efficient solution to overcome distance limitations of RS232 or for connecting to industrial devices with an RS422/485 interface.
No additional software is required for operation. With an easily accessible DIP switch you can configure the interface for RS422 or RS485. The CS-428i operates at speeds up to 921.6Kbps

What is Isolation?

When an electrical shock caused by power or ground is passed on to the system it can cause severe, if not irrecoverable damage. This can be prevented by using Opto-Isolation. In addition, isolation has other benefits by reducing problems caused by signal distortion and signal line impedance matching.

Opto-Isolation

The CS-428i Opto-Isolation protects up to DC 3KV between RS232 and RS422, RS485 sides. Opto-Isolation perfectly isolates the two endpoints so devices are protected from unfavorable electrical conditions such as ground potential differences, lightning and line interference. This results in more stable and reliable communications.

Features

Serial

Maximum Speed	921.6 Kbps
Maximum Distance	1.2 Km. 24AWG twisted pair cable
Connector	RS232: DE-09S(DB9 Female), RS422/S485: Terminal Block 5 Pins
Signal Lines	RS232: TXD, RXD, RTS, DTR, GND
	RS422: TXD+, TXD-, RXD+, RXD-
	RS485: TRXD+, TRXD-
RS422 Mode	Point to Point, Multi-Drop
RS485 Mode	Echo, Non-Echo
Slide Switch	RS422/RS485 selectable

Operating Environment

Operating Temperature	-40~85 °C
Storing Temperature	-40~85 °C
Humidity	5~95% Non-Condensing

Certifications

Certificates	CE, FCC, KC

Identificación de artículo	101292
Estado
Fabricante	SystemBase
País de origen
Contenido	1 undefined

CS-428i (‘RS232 to RS422/RS485’ and ‘RS422/RS485 to RS232’ Converter)