The predecessorof this article is TEF0008-02-D.

The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) based on VITA 57.1 FMC HPC Standard, with four SFP+ 10 Gbit ports for fiber optical SFP modules. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.

The front panel is only offered as an additional accessory (Trenzarticle Nr. 34034).

Mounting holes near the front pannel are not implemented due to physical restrictions caused by the SFP cage. The dimensions exceed in some area the by Vita 57.1 standard defined dimensions. In the middle region of the card the cage is higher than the specified max high for this area. Check carefully if the carrier card uses this space for other components conflicting mechanical.The bottom side is at the high limit.

All parts are at least industrial temperature range of -40C to +85C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

Four SFP+ 10 Gbit ports
HPC FMC connector
Low jitter programmable clock generator
AlteraMAX10 FPGA10M08SAU169I7G
3.3 V to 1.8 V DC/DC converter
32Kbit EEPROM
Status LED (green)
Dimension: 69 x 84 mm, SFP+ connector excluded (+ 5.5 mm)
Highest part on PCB top is 9.5 mm (SFP+ cage, excluded front plate),bottom 1.4 mm (MAX10 FPGA)

Other assembly options for cost or performance optimization plus high volume prices available on request.

Scope of Delivery

1 x TEF0008-03-D Trenz Electronic FMC card

Additional Information

Manufacturer's article number: TEF0008-03-D
Trenz Electronic TEF0008 Wiki
Support Forum

All modules produced by Trenz Electronicare developed and manufactured in Germany.

Caractéristique technique	Valeur
ID de l’art.	102955
État
ID de l'ancien article	0197c0e0905c73c2aa23ccdc1c28e838
Modèle	TEF0008-03-D
Fabricant
Pays de fabrication	Allemagne
Contenu	1 pièce
Poids	75 g

FMC Card with four SFP+ 10 Gbit ports (TEF0008-03-D)

Key Features

Scope of Delivery

Additional Information